Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Brake Light on a Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light bulb

See other generations:
Video tutorial

In today's video, you will see how to change the rear brake light on a Hyundai Elantra, model produced in 2019/2020. Start the operation by opening the boot of the vehicle and removing the upholstery panel near the back of the rear light. Next, unscrew the two securing nuts of the light and disconnect the wiring.

After that, push the light from the inside outwards as shown in the video to remove it from its housing. Now, unscrew the bulb holder for the brake light to change the bulb, and finally reassemble everything by following the reverse procedure.


Posted on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light in the Hyundai Elantra
How to Replace the Third Brake Light in the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In today's video, see how to replace the third brake light in the Hyundai Elantra. First, open the boot. Remove the cover from the boot lining. Then,…
How to reset the Service light on the Hyundai Elantra?
How to reset the Service light on the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) To reset the Service light on the Hyundai Elantra, connect a diagnostic tool to the vehicle's OBD port, which is located at the bottom left of the st…
How to Reset the Tyre Pressure Light on a Hyundai Elantra 6
How to Reset the Tyre Pressure Light on a Hyundai Elantra 6
Hyundai Elantra (2015-2020 / MK 6) If you want to manually reset the service light that keeps illuminating on the instrument cluster of your Hyundai Elantra Mk6 (2015-2020), simply fol…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos