Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Shock absorbers

Hyundai Elantra - Shock absorbers

Hyundai Elantra (2000-2006 / MK 3, XD)
Replacement of front shock absorbers
Replacing the front shock absorbers is not the typical do-it-yourself maintenance, but if you get the appropriate clamps to compact the spring, then you can …read all…
Posted on 31 August 2023 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
How to replace the rear shock absorber
To replace the rear shock absorber you must first loosen the wheel nuts. Then lift the car and remove the wheel. As you can see from the pictures, the shock …read all…
Posted on 29 July 2023 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Replacement of front shock absorbers
Raise the car on a lift and remove the front wheel to facilitate subsequent operations. Remove the support bracket for the ABS and brake oil pipe and then the …read all…
Posted on 17 July 2023 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Removing the front shock absorber
Open the front hood and lift the car on a lift; then remove the front wheel. Remove the brake wear sensor support and unscrew the bolts fixing the shock …read all…
Posted on 12 July 2023 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos