Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Elantra
  6. : Car stereo

Hyundai Elantra - Car stereo

Hyundai Elantra (2006-2010 / MK 4, HD)
How do you reset the radio of the Hyundai Elantra?

In order to reset the car radio of the Hyundai Elantra, you need to remove and reinsert the fuse that controls the device's operation. To perform this …read all…
Posted on 26 January 2024 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to reset the car radio in Hyundai Elantra?

The car radio must be reset whenever it gives problems both in terms of reproduced audio and recognition of any connected devices or, again, in the event that …read all…
Posted on 30 May 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
Disassembly of the car radio on Hyundai Elantra

What to do if your car stereo is damaged? Let's see how the dashboard is removed from above. We pry under the plastic covering (lower side: let's remove it …read all…
Posted on 20 March 2024 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
How to reset the car stereo in the Hyundai Elantra?

If you need to reset your Hyundai Elantra car stereo but don't know where to start, this is easier and quicker than you can imagine. All you have to do to …read all…
Posted on 20 February 2024 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
How to change the radio on Hyunai Elantra

We want to replace the car radio to our Hyundai Elantra? To disassemble the car radio you need to remove the plastic coating fixed on the central dashboard, …read all…
Posted on 17 January 2024 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
How to disassemble car stereo on Hunday Elantra

We replace the car radio that no longer works. Let's see in this video how to take it apart. Remove the stereo trim frame with a plastic lever (where the …read all…
Posted on 10 December 2023 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
How to remove the car stereo and add the subwoofer

The following video shows the procedure for removing the car radio on a Hyunday Elantra. It is necessary to start from the bottom edge of the frame (as …read all…
Posted on 5 July 2023 by ScegliAuto

Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos