Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove Car Radio from Hyundai Elantra

Model: Hyundai Elantra MK 3, XD - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car stereo

See other generations:
Video tutorial

Replace the car radio that no longer works. Follow this guide to remove it. Remove the trim around the stereo using a plastic lever (where the air vents are located) and detach it from the centre console.

Unscrew the securing screws. Once the stereo is free, use a screwdriver to unscrew the securing screws located on its sides.

Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, reverse the disassembly steps.

Turn on the car radio and check if it works.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Hyundai Elantra (2015-2020 / MK 6) If you need to reset the car radio in your Hyundai Elantra but don't know where to start, this operation is simpler and quicker than you might think.…
Hyundai Elantra (2006-2010 / MK 4, HD) To reset the radio on the Hyundai Elantra, you need to remove and reinsert the fuse that controls the device's operation. To do this, open the bonnet…
Hyundai Elantra (2006-2010 / MK 4, HD) Resetting the radio is necessary whenever it experiences issues with audio playback or recognition of connected devices, or if the display is not fun…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos