Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Car Radio in a Hyundai Elantra?

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Warning light – error code

If you need to reset the car radio in your Hyundai Elantra but don't know where to start, this operation is simpler and quicker than you might think. All you need to do to reset your car radio is to open the plastic cover that gives access to the fuse box (under and to the left of the steering wheel) and locate the two clearly visible switches for on (power) and off (shutdown). Using a long, thin, pointed object (a simple pen will do), press off, wait a few seconds, and then press on. At this point, turn on your car radio and check that the reset has been successful.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Radio on Hyundai Elantra
How to Change the Radio on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Do you want to replace the car radio in your Hyundai Elantra? To remove the car radio, you need to detach the trim panels fixed to the centre console…
How to reset the TPMS light on the 2020 Hyundai Elantra
How to reset the TPMS light on the 2020 Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) To reset the warning light of the 2020 Hyundai Elantra, first, you need to check the tire pressure. Using a pressure tester, check the current pressu…
How to reset the oil light on the Hyundai Elantra
How to reset the oil light on the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this video tutorial, we will show you how to reset the oil duration on a Hyundai Elantra vehicle, produced from 2017 to 2020. Start the ignition a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos