Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the 2020 Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the light on the 2020 Hyundai Elantra, first check the tyre pressure. Using a pressure gauge, check the current pressure and inflate the tyres according to the manufacturer's instructions.

The correct pressure information is available on the lower part of the left front door. Once the pressure is adjusted, proceed to reset the light.

To do this, turn on the instrument panel and start the vehicle, allowing the engine revs to rise, which will enable the sensors to read the new settings.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

What the TPMS Light Indicates on the 2016 Hyundai Elantra
What the TPMS Light Indicates on the 2016 Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) The tyre pressure warning light or TPMS light on the 2016 Hyundai Elantra indicates that it is time to adjust the tyre pressures. This operation, inc…
Reset the TPMS Warning Light on the Hyundai Elantra MK6
Reset the TPMS Warning Light on the Hyundai Elantra MK6
Hyundai Elantra (2015-2020 / MK 6) This guide shows how to reset the tyre pressure monitoring system (TPMS) warning light on a sixth-generation Hyundai Elantra. Before starting this pr…
How to Reset the TPMS Light on the 2018 Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) To reset the TPMS light related to the tyre pressures on your 2018 Hyundai Elantra, you do not need any tools. First, park the car on a flat surface …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos