Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : What does the TPMS light on the 2016 Hyundai Elantra indicate?

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Checks and maintenance
Operation: What does the TPMS light on the 2016 Hyundai Elantra indicate?

The tire pressure monitoring system (TPMS) light on the 2016 Hyundai Elantra is used to indicate that it is time to adjust the tire pressure. This operation, including resetting the light, can be done independently, but it is important to follow the manufacturer's instructions. Once the pressure of each tire has been adjusted and it has been checked that no tires need to be replaced, you can proceed to reset the light. This is usually done through the car's onboard computer by going to the vehicle settings and then selecting reset.


Posted on 9 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Elantra 2010-2015 - Why do the steering wheel controls of the Hyundai Elantra not work? Read Answer
    • Elantra 2021-2026 - What are the warning lights of the Hyundai Elantra? Read Answer
    • Elantra 2015-2020 - What does "service required" mean on the Hyundai Elantra? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos