Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Radio on Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

Do you want to replace the car radio in your Hyundai Elantra? To remove the car radio, you need to detach the trim panels fixed to the centre console, here's how. Open the left door of the dashboard and unscrew the screws that secure the stereo trim frame with a screwdriver: detach it from the centre console.

Unscrew the fastening screws located on the sides of the car radio with a screwdriver: pull it out by hand and disconnect the cables (power and antenna).

Install the metal housing where the car radio will fit, connect the terminals, and secure the new car radio. Refit the trim frame.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Hyundai Elantra (2021-2026 / CN7, MK 7) To replace the engine air filter on your latest Hyundai Elantra (2026 model), follow the steps described in this new guide. First, purchase a new fil…
Hyundai Elantra (2015-2020 / MK 6) If you need to reset the car radio in your Hyundai Elantra but don't know where to start, this operation is simpler and quicker than you might think.…
Hyundai Elantra (2015-2020 / MK 6) Today, let’s discover the steps to remove and replace the external door handle on the Hyundai Elantra. First, open the front door of your car and sta…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos