Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Hyundai Elantra - Engine

Hyundai Elantra (2006-2010 / MK 4, HD)
How to partially disassemble the engine of a Hyundai Elantra
Let's see this video how to remove a part of the engine of a Hyundai Elantra. We lift the car on a column bridge placing it at the preferred height, unscrew …read all…
Posted on 1 October 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to remove the side engine block of a Hyundai Elantra
Let's see in this video how to remove the side cover of the engine of a Hyundai Elantra. We lift the car on a column bridge and position it at the desired …read all…
Posted on 30 September 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to remove the pistons of a Hyundai Elantra
How to disassemble the pistons of the engine of a Hyundai? Operation not exactly simple but with due patience achievable by everyone. To begin, we lift the car …read all…
Posted on 29 September 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to screw Hyundai Elantra cylinder head
Has the engine of our car started to give the first failures? Have we removed the cylinder head of our Hyundai? Let's see together how to start assembling a …read all…
Posted on 27 September 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to disassemble the engine and its parts of the Hyundai Elantra car
Let's see together how to disassemble an engine of a hyundai. We lift the car on a column bridge placing it at the preferred height, unscrew the plug pin of …read all…
Posted on 27 September 2023 by ScegliAuto
Hyundai Elantra (1995-2000 / MK 2, J2)
Oxygen sensor replacement instructions
The oxygen sensor, better known as lambda probe, has the function of detecting the oxygen value present in the exhaust gases and providing this information to …read all…
Posted on 23 August 2023 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos