Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to disassemble the engine and its parts of the Hyundai Elantra car

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra HD, MK 4 - Years 2006-2010
Part: Engine
Operation: How to disassemble the engine and its parts of the Hyundai Elantra car

Let's see together how to disassemble an engine of a hyundai. We lift the car on a column bridge placing it at the preferred height, unscrew the plug pin of the oil pan and let it flow into a container for disposal, screw the pin back on. We unscrew all the engine side plastic parts with a cordless drill, then unscrew the oil pan plastic and pull it off with a screwdriver. We unscrew the belt pins, remove the plastic panel on the engine head and remove the oil rod. We disconnect all the clamps from the pipes in the engine seats, unscrew all the pins of the cylinder head and remove it together with the gasket. Now we remove the air filter kit in such a way as to get to disassemble the throttle body, without removing the filter it is not possible to disassemble this. With pliers disconnect the metal clamps of the various pipes and the various power supply terminals as shown in the video. Unscrew the locking pins of the engine exhaust in the lower part and carefully pull it out of the compartment. Another step to take is to disassemble the alternator with its cables, disassemble the engine chain guard with all its pins, take the chain out of its seat, now unscrew the engine head with a battery drill. We are careful to extract all the pins from the seats, the camshaft and put everything in a container. We remove the battery from the engine compartment and all the electrical system disassembled up to now. We disassemble and remove the engine block, now with a ratchet wrench we unscrew the pins on the block, then we remove the cylinder head and the engine connecting rods. Let's clean all the previously disassembled pieces from dirt and sealant residues. We clean the cylinder block thoroughly and place the new connecting rod around the seat. We overlap the head unit, making it fit together perfectly. We tighten the pins with a suitable torque wrench. Let's remember the exact order of the various pins.


Posted on 27 September 2023 by ScegliAuto



How to replace the ignition coils of the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) The replacement of the ignition coils of the Hyundai Elantra is carried out by opening the hood and removing the plastic cover of the upper part of t
How to replace the ignition coils of the Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In order to replace the ignition coils of the Hyundai Elantra you have to go to raise the hood so that you can have access to the upper part of the e
How to replace an air filter on Hyundai Elantra.
Hyundai Elantra (2006-2010 / HD, MK 4) In this video tutorial we can see how it is possible to replace the air filter on Hyundai Elantra, following a few simple steps: the first thing we n

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos