Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to replace an air filter on Hyundai Elantra.

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra HD, MK 4 - Years 2006-2010
Part: Air filter
Operation: How to replace an air filter on Hyundai Elantra.

In this video tutorial we can see how it is possible to replace the air filter on Hyundai Elantra, following a few simple steps: the first thing we need to do is to buy a new air filter. Next step we have to get in the car and turn off the engine, pull the handbrake; lift the bonnet and secure it with the special rod. Remove the retaining clips of the air filter case cover; lift the lid and remove the old filter from its housing; clean the housing and insert the new air filter; reassemble all parts in reverse order.


Posted on 23 July 2022 by ScegliAuto



How to replace the air filter on the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) If the engine air filter in your Hyundai Elantra (2015-2020) is excessively worn and you want to replace it yourself, simply follow these steps. Firs
How to replace the cabin air filter of the 2021 Hyundai Elantra.
Hyundai Elantra (2015-2020 / MK 6) If you need to replace the cabin air filter in your 2017 Hyundai Elantra and don't know the steps to follow, don't worry because below you will find
How to replace the air filter on Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In order to replace the air filter on the Hyundai Elantra you have to go and open the hood, so that you have access to the components inside the engi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos