Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to disassemble and install a starter motor on a Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 4, HD - Years 2006-2010
Part: Starter motor
Operation: How to disassemble and install a starter motor on a Hyundai Elantra

Your car ignition no longer works for some reason? Let's see how to remove a starter motor on a Hyundai Elantra. To begin with, with a socket wrench we disassemble the cables of the power supply of the car battery, then, we disconnect the terminals of the power supply of the starter motor with a pliers or screwdriver depending on the pressure of the tabs. We unscrew the locking pins of the starter motor and remove the same from the engine compartment. Finally we assemble the new ignition motor with the power supply cables and with the attached tightening screws.


Posted on 1 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos