Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Timing belt

Hyundai Elantra - Timing belt

Hyundai Elantra (2006-2010 / MK 4, HD)
How do you replace the timing belt of the Hyundai Elantra?
In order to replace the timing belt of the Hyundai Elantra, you need to loosen the screws that fix the cover on the left side of the engine block. Once this …read all…
Posted on 11 April 2024 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to replace belt on Hyundai Elantra
Let's see how to remove and replace the timing belt on Hyundai Elantra. We lift the car on a column bridge and remove the front wheel, with a screwdriver the …read all…
Posted on 29 October 2023 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
How do we remove the timing belt on Hyundai Elantra
Let's get ready to remove the timing belt on Hyundai Elantra: lift the car on a column or jack bridge and remove the front wheel, with a screwdriver the right …read all…
Posted on 21 October 2023 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
How to remove the timing belt on Hyundai Elantra
Do you want to remove the timing belt without spending money on labor? Let's see how to remove the timing belt on a Hyundai Elantra: open the engine hood and …read all…
Posted on 16 October 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to assemble the timing chain of a Hiundai Elantra
Let's see in this detailed video how to install and replace the timing chain on a Hyundai Elantra. Remove the right wheel rocker with a screwdriver. With a …read all…
Posted on 1 October 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to replace your car's timing chain
To start, remove the engine oil that is inside by unscrewing the cap under the sump, remove the engine cover that is under the engine with the key, unscrew the …read all…
Posted on 1 October 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to disassemble the pulley on a Hyundai Elantra
Let's see in this detailed video how to disassemble the pulley of a Hyundai Elantra. Let us equip ourselves with a socket wrench with suitable sockets or an …read all…
Posted on 1 October 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
Timing belt replacement
In any case, the replacement of the timing belt requires a minimum of basic mechanical knowledge since a simple mistake could seriously compromise the engine. …read all…
Posted on 3 August 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
Removing and replacing the timing belt and water pump
This video shows us how to remove and replace the timing belt and water pump. When we decide to replace the timing belt it is highly advisable to replace the …read all…
Posted on 1 August 2023 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos