Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to remove the timing belt on Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Timing belt
Operation: How to remove the timing belt on Hyundai Elantra

Do you want to remove the timing belt without spending money on labor? Let's see how to remove the timing belt on a Hyundai Elantra: open the engine hood and lift it, put it in safety, with a fixed wrench we go to loosen the tensioner roller and remove the belt from its seat. With a socket wrench we go to unscrew the tightening pin of the belt tensioner roller, remove the water pump. We assemble the new water pump, the belt tensioner and the belt itself, we tighten everything with the socket wrench. Finally we assemble the fan kit with the locking pins.


Posted on 16 October 2023 by ScegliAuto



How do you replace the timing belt of the Hyundai Elantra?
Hyundai Elantra (2006-2010 / HD, MK 4) In order to replace the timing belt of the Hyundai Elantra, you need to loosen the screws that fix the cover on the left side of the engine block. On
How do we remove the timing belt on Hyundai Elantra
Hyundai Elantra (2000-2006 / MK 3, XD) Let's get ready to remove the timing belt on Hyundai Elantra: lift the car on a column or jack bridge and remove the front wheel, with a screwdriver
How to replace belt on Hyundai Elantra
Hyundai Elantra (2006-2010 / HD, MK 4) Let's see how to remove and replace the timing belt on Hyundai Elantra. We lift the car on a column bridge and remove the front wheel, with a screwdr

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos