Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Power Steering Pump

Model: Hyundai Elantra J2, MK 2 - Years: 1995, 1996, 1997, 1998, 1999, 2000
Part: Pump

See other generations:
Video tutorial

Replacing the power steering pump on the car model in question is quite straightforward due to its location; start by loosening the mounting bolts of the pump to relieve the tension on the drive belt and free the pulley; then proceed to remove the mounting bolt of the high-pressure hose, taking care not to spill oil on the auxiliary belt below; next, loosen the clamp securing the return oil hose and slide the hose off; then reverse the process to install the new pump by connecting the hoses and the drive belt; finally, top up the power steering fluid.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Steering Column of the Hyundai Elantra
Guide to Replacing the Steering Column of the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) This guide explains the procedure for removing and replacing the steering column of the Hyundai Elantra. First, get in the vehicle and begin by remov…
Instructions for Replacing the Oxygen Sensor
Instructions for Replacing the Oxygen Sensor
Hyundai Elantra (1995-2000 / J2, MK 2) The oxygen sensor, better known as the lambda sensor, functions to detect the oxygen level present in the exhaust gases and provide this information …
Instructions for Alternator Replacement
Instructions for Alternator Replacement
Hyundai Elantra (2000-2006 / MK 3, XD) To remove the alternator, position the vehicle on suitable car ramps to access the underside of the chassis. You will also need to remove the radiato…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos