Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Control arm

Hyundai Elantra - Control arm

Control Arm Hyundai Elantra (2000-2006 / mk 3, xd)

Hyundai Elantra (2000-2006 / MK 3, XD)
How to Replace the Front Control Arm
Place the car on a ramp and lift it to a comfortable working height. Remove the front wheel corresponding to the control arm to be replaced. At this point, …Read all…
Posted on 5 March 2026 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Replacement of Suspension Arm
The suspension arm connects the chassis to the struts. When it is faulty, it needs to be replaced. This is not a very complicated job and can be done …Read all…
Posted on 5 March 2026 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Replacing a Car Suspension Arm
The suspension arm of the car connects the chassis to the struts. If it bends, breaks, or wears out, it will need to be replaced, as a faulty arm can lead to …Read all…
Posted on 3 March 2026 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Replacement of the Rear Suspension Arm
Replacing the rear suspension arm is very simple as there is no need to disassemble any other components apart from the arm's fixings. Lift the vehicle on the …Read all…
Posted on 1 March 2026 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Replacement of Front Suspension Wishbone
Lift the vehicle on a hydraulic lift and remove the front wheel; then remove the link that connects the anti-roll bar to the suspension; next, remove the …Read all…
Posted on 17 February 2026 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Front Suspension Wishbone Ball Joint Replacement
Lift the vehicle on a hydraulic lift and remove the front wheel; unscrew the fixing nuts of the link that connects the anti-roll bar to the wishbone; proceed …Read all…
Posted on 10 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (1) Shocks (4) Car stereo (4) Battery (7) Ignition coil (3) Bushings (1) Control arm (6) Transmission (1) Spark plugs (4) Body (1) Glove compartment (1) Key (10) Timing belt (9) V-belt (1) Onboard computer (2) Checks and maintenance (7) Oil pan (1) Dashboard (2) Bearing (1) Brake rotors (3) Headlight (8) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (10) Fuel filter (1) Oil filter (1) Parking brake (2) Clutch (1) Accessory kit (4) Light bulb (1) Side marker bulb (1) Headlight bulb (9) Tail light bulb (7) Interior dome light bulb (1) License plate light (1) (5) Handle (10) Engine (6) Power window motor (1) Starter motor (3) Transmission fluid (1) Engine oil (1) Clock (3) Door trim panel (4) Front bumper (3) Brake pads (3) Tires (1) Shift knob (2) Pump (2) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (1) Fuse box (23) Seat (3) Axle shaft (1) Oxygen sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (8) Tire pressure warning light (14) Service warning light (33) Brake drums and shoes (1) Fuel cap (1) Windshield wipers (1) Cylinder head (2) Valve (1) Blower motor (1) Steering wheel (2)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos