Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Front suspension swing arm replacement

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 3, XD - Years 2000-2006
Part: Arm
Operation: Front suspension swing arm replacement

Raise the car on a lift and remove the front wheel; then remove the connecting rod that connects the stabilizer bar to the suspension; then remove the nut fixing the oscillating arm head to the wheel hub (give a few hammer blows on the head seat to release it and be able to extract it); then proceed with disassembling the fixing pins of the swinging arm to the frame and to the engine cradle. Then install the new oscillating arm by first housing it in its seat and then insert the head and the rear bushings in their respective seats. Tighten the fixing pins carefully.


Posted on 31 July 2023 by ScegliAuto



Front suspension swing arm head replacement
Hyundai Elantra (2000-2006 / MK 3, XD) Raise the car on a lift and remove the front wheel; unscrew the fixing nuts of the connecting rod that connects the swinging arm anti-roll bar; proce
Suspension arm replacement
Hyundai Elantra (2000-2006 / MK 3, XD) The suspension arm has the function of guaranteeing the junction between the frame and the uprights. When it is defective it is necessary to replace
Rear suspension arm replacement
Hyundai Elantra (2000-2006 / MK 3, XD) The replacement of the rear suspension arm is very simple to carry out since it is not necessary to disassemble any other element except the fixings

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos