Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Hyundai Elantra rear suspension replacement

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra UD, MK 5, MD - Years 2010-2015
Part: Suspensions
Operation: Hyundai Elantra rear suspension replacement

In this guide we will see the main steps on how to disassemble and replace the rear suspension of the Hyundai Elantra. First of all it is necessary to raise the car, then removing the rear wheels; then we hold the suspension up with a jack and unscrew the bolt that we find on the lower part of the shock absorber, as shown in the video. At this point we are going to unscrew the upper part of the suspension, thus removing the spring and the shock absorber; we then install the new original suspension and reassemble everything, applying the reverse procedure of disassembly!


Posted on 3 September 2022 by ScegliAuto



Rear suspension arm replacement
Hyundai Elantra (2000-2006 / MK 3, XD) The replacement of the rear suspension arm is very simple to carry out since it is not necessary to disassemble any other element except the fixings
How to fold down the rear seats of your hyundai elantra
Hyundai Elantra (2010-2015 / UD, MK 5, MD) We will see below the instructions which will allow us to fold down the rear seat of the Hyundai Elantra, in simple and fast steps. First of all, we
How do you replace the cabin filter on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / HD, MK 4) In order to replace the cabin filter of the Hyundai Elantra you have to open the glove box located on the front passenger side, in order to release t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos