Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to fold down the rear seats of your hyundai elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra UD, MK 5, MD - Years 2010-2015
Part: Seat
Operation: How to fold down the rear seats of your hyundai elantra

We will see below the instructions which will allow us to fold down the rear seat of the Hyundai Elantra, in simple and fast steps. First of all, we open the tailgate of the trunk and start pulling the two levers that we find both on the right and on the left, on the upper part; in this way we will release our backrests, and then recline them, as illustrated in the video. In this way we will significantly increase the load volume of our car; then let's lift the backrests again to hook them perfectly, putting them in the initial position!


Posted on 16 May 2023 by ScegliAuto



Replacing the fuel filter on Hyundai Elantra
Hyundai Elantra (2006-2010 / HD, MK 4) Removing the fuel filter on Hyundai Elantra? We disassemble the fuel filter together with the pump. We disassemble the rear seats, remove the metal c
How to replace fuel pump in Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In this tutorial we can see how to replace the fuel pump in the Hyundai Elantra, a very simple operation but which still requires good manual skills.
How to replace the rear headlight bulbs in the Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In this tutorial we can see how to replace the rear headlight bulbs in the Hyundai Elantra, an extremely simple and quick operation. First of all, ma

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos