Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement on Hyundai Elantra

Model: Hyundai Elantra MK 4, HD - Years: 2006, 2007, 2008, 2009, 2010
Part: Fuel filter

See other generations:
Video tutorial

To remove the fuel filter on a Hyundai Elantra, take out the fuel filter along with the pump. Remove the rear seat cushions, then take off the metal cover on the top of the floor to access the fuel pump located in the tank (as shown in the video).

Remove the fuel filter from inside the pump by disconnecting the circulation pipes. Install the new filter inside the pump container and then into the tank.

Refit the floor cover and tighten the screws. Reinstall the rear seat cushions.

Start and test the vehicle.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on the 2026 Hyundai Elantra
How to Replace the Engine Air Filter on the 2026 Hyundai Elantra
Hyundai Elantra (2021-2026 / CN7, MK 7) To replace the engine air filter on your latest Hyundai Elantra (2026 model), follow the steps described in this new guide. First, purchase a new fil…
How to Replace the Fuel Pump in the Hyundai Elantra?
How to Replace the Fuel Pump in the Hyundai Elantra?
Hyundai Elantra (2010-2015 / MK 5, MD, UD) In this tutorial, you will see how to replace the fuel pump in the Hyundai Elantra, a straightforward operation but one that requires good manual ski…
Where is the Fuel Pump Located on the Hyundai Elantra?
Where is the Fuel Pump Located on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / MK 4, HD) In this video, see where the fuel pump is located on the Hyundai Elantra and how to proceed if you need to replace it. As shown, the pump is located …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos