Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in the Hyundai Elantra?

Model: Hyundai Elantra MK 5, MD, UD - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the fuel pump in the Hyundai Elantra, a straightforward operation but one that requires good manual skills. Before proceeding, disconnect the negative terminal of the battery to work safely.

Start by unhooking the rear seat, then flip both backrests, unscrew the indicated bolts, and completely remove the seat. Next, open the central cap, disconnect both the connector and the fuel hoses, and unscrew the large outer ring.

Once the pump is removed, simply follow the reverse procedure to install the replacement.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from the Hyundai Elantra
How to Remove the Fuel Pump from the Hyundai Elantra
Hyundai Elantra (2006-2010 / MK 4, HD) How to remove the fuel pump from the Hyundai Elantra? First, disconnect the battery cables, then remove the rear seat base of the car. Use a spanner …
Where is the Fuel Pump Located on the Hyundai Elantra?
Where is the Fuel Pump Located on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / MK 4, HD) In this video, see where the fuel pump is located on the Hyundai Elantra and how to proceed if you need to replace it. As shown, the pump is located …
Fuel Filter Replacement on Hyundai Elantra
Fuel Filter Replacement on Hyundai Elantra
Hyundai Elantra (2006-2010 / MK 4, HD) To remove the fuel filter on a Hyundai Elantra, take out the fuel filter along with the pump. Remove the rear seat cushions, then take off the metal …

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos