Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to find and how to replace the fuel filter on the Hyundai Atos Prime Mk1

Model: Hyundai Atos MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuel filter

See other generations:
Video tutorial

This guide shows how to locate and replace the fuel filter on the Hyundai Atos Prime Mk1. The first step is to safely lift the vehicle. From underneath the vehicle, on the left side near the left rear door, you can locate the fuel filter.

At this point, using a 19 mm and a 14 mm spanner, unscrew the lower and upper hydraulic lines. Remove the filter body from the mounting bracket and install a new unit.

Perform a few ignition cycles to ensure it fills correctly.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to repair the parking sensors of the Hyundai Atos Prime
How to repair the parking sensors of the Hyundai Atos Prime
Hyundai Atos (2011-2022 / MK 2) In this video we see how it is possible to repair parking sensors that no longer emit any sound. In this case it is a Hyundai Atos Prime, but concept…
Engine Oil and Oil Filter Replacement on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Hyundai Atos. First, lift the vehicle and remove the drain b…
Fuse Box Location on Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) On the Hyundai Atos, as well as many other Hyundai models and others, there are two fuse boxes: the first is located under the bonnet on the left sid…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos