Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light

See other generations:
Video tutorial

Is the rear light on your Hyundai Elantra damaged? Here’s how to remove the rear light. Open the boot lid, then remove the fabric cover (side trim of the boot).

Unscrew the securing nuts of the rear light using a socket wrench, disconnect the power connectors attached to the light, and pull it away from its housing. Fit the new light with the power connectors and respective securing nuts.

Reattach the side trim in the boot and close the boot lid. Turn on the rear lights using the controls in the cabin.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulbs on the Hyundai Elantra
How to Replace the Rear Headlamp Bulbs on the Hyundai Elantra
Hyundai Elantra (2010-2015 / MK 5, MD, UD) In today's video, you will learn how to replace the rear headlamp bulbs on the Hyundai Elantra in simple and quick steps. First, open the boot lid an…
How to Remove the Front Headlight of the Hyundai Elantra?
How to Remove the Front Headlight of the Hyundai Elantra?
Hyundai Elantra (2010-2015 / MK 5, MD, UD) To remove the front headlight of the Hyundai Elantra, open the bonnet to access the screws that secure the headlight from the top. Once these screws …
How to Replace the Rear Headlamp Bulb on a Hyundai Elantra?
How to Replace the Rear Headlamp Bulb on a Hyundai Elantra?
Hyundai Elantra (2000-2006 / MK 3, XD) To replace the rear headlamp bulb on your Hyundai Elantra, open the boot to access the luggage compartment. Here, detach the carpet lining near the l…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos