Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Suspension Arm

Model: Hyundai Elantra MK 3, XD - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Control arm

See other generations:
Video tutorial

Replacing the rear suspension arm is very simple as there is no need to disassemble any other components apart from the arm's fixings. Lift the vehicle on the ramp and locate the seat of the rear suspension arm. Then, proceed to unscrew the fastening nut of the ball joint and the bolt fastening the bush at the other end of the arm. Once the nut and bolt are removed, you can take out the arm from its seat and proceed in reverse for the installation of the new one, ensuring to tighten the nut and bolt.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing a Car Suspension Arm
Replacing a Car Suspension Arm
Hyundai Elantra (2000-2006 / MK 3, XD) The suspension arm of the car connects the chassis to the struts. If it bends, breaks, or wears out, it will need to be replaced, as a faulty arm can…
Replacement of Front Suspension Wishbone
Replacement of Front Suspension Wishbone
Hyundai Elantra (2000-2006 / MK 3, XD) Lift the vehicle on a hydraulic lift and remove the front wheel; then remove the link that connects the anti-roll bar to the suspension; next, remove…
Replacement of Suspension Arm
Replacement of Suspension Arm
Hyundai Elantra (2000-2006 / MK 3, XD) The suspension arm connects the chassis to the struts. When it is faulty, it needs to be replaced. This is not a very complicated job and can be done…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos