Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Instrument cluster

Hyundai Elantra - Instrument cluster

Hyundai Elantra (2015-2020 / MK 6)
How to reset the tire pressure light on the Hyundai Elantra.
If you want to find out how to manually reset the tire warning light on the display of your Hyundai Elantra, all you have to do is read the following mini …read all…
Posted on 7 September 2023 by ScegliAuto
Hyundai Elantra (2021-2024 / MK 7, CN7)
How to reset the 2021 Hyundai Elantra service light
In the following guide dedicated to all of you owners of a 2021 Hyundai Elantra, we will explain how to perform the manual service light reset procedure …read all…
Posted on 20 December 2022 by ScegliAuto
Hyundai Elantra (2010-2015 / UD, MD, MK 5)
How to remove the instrument cluster on Hyundai Elantra
As for the disassembly of the instrument cluster on Hyundai Elantra, initially there are no bolts to unscrew as often happens. The first thing you need to do …read all…
Posted on 9 February 2024 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos