Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on Hyundai Elantra

Model: Hyundai Elantra MD, UD, MK 5 - Years 2010-2015
Part: Instrument cluster

When it comes to removing the instrument cluster on a Hyundai Elantra, there are initially no bolts to unscrew as is often the case. The first thing you need to do is manually remove the upper plastic cover, as clearly shown in the video. Only afterwards will you find two small screws that you can unscrew with a cross-head screwdriver. Now, using a small flat-head screwdriver or a plastic wedge, pry in the gap related to the lower plastic, freeing more screws. Unscrew all of them and pull out the instrument cluster, disconnecting the connectors as you do so. Proceed in reverse for reassembly.

Updated on 16 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Dismantling the Dashboard of the Hyundai Elantra
Dismantling the Dashboard of the Hyundai Elantra
Hyundai Elantra (2010-2015 / MD, UD, MK 5) Here are the necessary instructions for dismantling and replacing the dashboard to change the cabin heating radiator of the Hyundai Elantra. First, o…
How to reset the tire pressure sensor in the Hyundai Elantra 6
How to reset the tire pressure sensor in the Hyundai Elantra 6
Hyundai Elantra (2015-2020 / MK 6) If you want to manually reset the service light that keeps coming on steadily on the instrument panel of your Hyundai Elantra Mk6 (year 2015-2020), t…
Replacing the Lambda Sensor of the Hyundai Elantra
Replacing the Lambda Sensor of the Hyundai Elantra
Hyundai Elantra (2000-2006 / XD, MK 3) Today, we will go through the instructions to remove and replace the lambda sensor of the Hyundai Elantra; the fault is indicated by the warning ligh…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos