Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Bushings

Hyundai Elantra - Bushings

Bushings Hyundai Elantra (2000-2006 / xd, mk 3)

Hyundai Elantra (2000-2006 / XD, MK 3)
Replacement of Stabiliser Bar Bushes
The failure of the support bushes of the stabiliser bar is a common issue, especially in larger vehicles, leading to knocking noises from the bar. Replacing …Read all…
Posted on 27 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (1) Shocks (4) Car stereo (4) Battery (7) Ignition coil (3) Bushings (1) Control arm (6) Transmission (1) Spark plugs (4) Body (1) Glove compartment (1) Key (10) Timing belt (9) V-belt (1) Onboard computer (2) Checks and maintenance (7) Oil pan (1) Dashboard (2) Bearing (1) Brake rotors (3) Headlight (8) Tail light (4) Fog lights (1) Air filter (9) Cabin air filter (10) Fuel filter (1) Oil filter (1) Parking brake (2) Clutch (1) Accessory kit (4) Light bulb (1) Side marker bulb (1) Headlight bulb (9) Tail light bulb (7) Interior dome light bulb (1) License plate light (1) (4) Handle (10) Engine (6) Power window motor (1) Starter motor (3) Transmission fluid (1) Engine oil (1) Clock (3) Door trim panel (4) Front bumper (3) Brake pads (3) Tires (1) Shift knob (2) Pump (2) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (1) Fuse box (22) Seat (3) Axle shaft (1) Oxygen sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (8) (9) Tire pressure warning light (5) Service warning light (33) Brake drums and shoes (1) Fuel cap (1) Windshield wipers (1) Cylinder head (2) Valve (1) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos