Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Stabiliser Bar Bushes

Model: Hyundai Elantra XD, MK 3 - Years 2000-2006
Part: Bushings

The failure of the support bushes of the stabiliser bar is a common issue, especially in larger vehicles, leading to knocking noises from the bar. Replacing them is straightforward and economical: start by lifting the vehicle on a ramp and removing the fixing pins of the support brackets that contain the bushes. Remove the old bush and insert the new one through the designated opening, then reposition and secure the bracket by tightening the respective fixing pins.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Front Suspension Wishbone Ball Joint Replacement
Front Suspension Wishbone Ball Joint Replacement
Hyundai Elantra (2000-2006 / XD, MK 3) Lift the vehicle on a hydraulic lift and remove the front wheel; unscrew the fixing nuts of the link that connects the anti-roll bar to the wishbone;…
Replacement of Suspension Arm
Replacement of Suspension Arm
Hyundai Elantra (2000-2006 / XD, MK 3) The suspension arm connects the chassis to the struts. When it is faulty, it needs to be replaced. This is not a very complicated job and can be done…
Replacement of Front Suspension Wishbone
Replacement of Front Suspension Wishbone
Hyundai Elantra (2000-2006 / XD, MK 3) Lift the vehicle on a hydraulic lift and remove the front wheel; then remove the link that connects the anti-roll bar to the suspension; next, remove…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos