Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Headlight bulb

Hyundai Elantra - Headlight bulb

Hyundai Elantra (2015-2020 / MK 6)
How to replace the front headlight bulb of the 2017 Hyundai Elantra.
In the following guide dedicated to all owners of a 2017 Hyundai Elantra, we will discover how to correctly replace the front headlight bulb. First of all, …read all…
Posted on 7 November 2023 by ScegliAuto
Hyundai Elantra (2015-2020 / MK 6)
How do you replace the front headlight bulb of the Hyundai Elantra?
In order to replace the front headlight bulb of the Hyundai Elantra, you need to open the hood so that you can loosen the screws that secure the bumper from …read all…
Posted on 29 June 2023 by ScegliAuto
Hyundai Elantra (2006-2010 / MK 4, HD)
How to replace the headlight bulb
It may happen that the headlight bulb of our car lightning, in this case you can do it yourself, without using the help of the electrician. A new bulb and …read all…
Posted on 13 September 2023 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Headlight bulb replacement
It may happen that the light bulb in our car burns out. In these cases, instead of using an electrician, you can do it yourself, thus saving on labor costs …read all…
Posted on 10 September 2023 by ScegliAuto
Hyundai Elantra (2000-2006 / MK 3, XD)
Complete disassembly of the front light
To completely disassemble the front light assembly, open the hood and remove the two screws securing the light. Disassemble the headlight unit by gently …read all…
Posted on 17 July 2023 by ScegliAuto
Alternator (1) Loudspeaker (1) Shock absorbers (4) Car stereo (7) Battery (7) Coil (3) Bushings (1) Arm (6) Gearbox (1) Spark plugs (4) Glove box (1) Key (6) Timing belt (9) -board computer (4) Checks and maintenance (14) Oil pan (1) Dashboard (1) Bearing (1) Brake discs (3) Headlight (4) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (7) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (4) Handle (9) Engine (6) Window motor (1) Starter motor (2) Gear oil (1) Door panel (1) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (3) Door (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Fuse box (6) Seat (1) Drive shaft (1) Lambda sensor (2) Suspensions (1) Outside rearview mirror (4) Drums and shoes (1) Engine head (2) Valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos