Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio from a Hyundai Elantra

Model: Hyundai Elantra MK 4, HD - Years: 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
This video is currently unavailable

What to do if your car radio is damaged? Here’s how to remove it from above the dashboard. Pry underneath the trim plastic (bottom side: detach it from above the dashboard).

Pry at the front of the cover plastic. Remove the cover from above the central console.

Once the car radio is free from constraints, unscrew the securing screws located on its sides with a screwdriver. Pull out the car radio with your hands and disconnect the cables (power and antenna).

After disassembly, simply install the new car radio into the dashboard of your vehicle.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Change the Radio on Hyundai Elantra
How to Change the Radio on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Do you want to replace the car radio in your Hyundai Elantra? To remove the car radio, you need to detach the trim panels fixed to the centre console…
How to Reset the Car Radio in a Hyundai Elantra?
How to Reset the Car Radio in a Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) If you need to reset the car radio in your Hyundai Elantra but don't know where to start, this operation is simpler and quicker than you might think.…
How to Reset the Radio on the Hyundai Elantra?
How to Reset the Radio on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / MK 4, HD) To reset the radio on the Hyundai Elantra, you need to remove and reinsert the fuse that controls the device's operation. To do this, open the bonnet…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos