Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to change the rear brake light Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 3, XD - Years 2000-2006
Part: Rear light bulb
Operation: How to change the rear brake light Hyundai Elantra

Unfortunately, to check if the brake light bulbs are burned out, you need a helper to press the brake pedal. Apart from this detail, the work to be done for its replacement is relatively simple, especially with this guide. Open the tailgate and unscrew the two panel screws. Let's remove it from its seat and unscrew the three nuts. Now let's keep the spare close at hand and disassemble the headlight, possibly support it while we replace the light. Then we press and at the same time we unscrew the bulb; now we insert the new one, push and turn to the right. We reassemble the rear light and insert in its seat, screw the nuts and screws.


Posted on 26 November 2023 by ScegliAuto



How to replace the third brake light in the Hyundai Elantra.
Hyundai Elantra (2015-2020 / MK 6) In today's video, we will see how to replace the third brake light in the Hyundai Elantra. First, we open the rear hood. We remove the hood's lining
Third brake light replacement on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Hi everyone! Replacing the single central brake light bulb on Hyundai Elantra is really very simple and very fast. To do this, in fact, it is suffici
How to replace the third brake light bulb in the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In this tutorial, we can see how to replace the third brake light bulb in the Hyundai Elantra, an extremely simple and quick operation. First of all,

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos