Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Ioniq
    4. : How to remove the door panel on Hyundai Ioniq

Hyundai Ioniq - Video tutorial

Model: Hyundai Ioniq MK 1 - Years 2016-2022
Part: Door panel
Operation: How to remove the door panel on Hyundai Ioniq

Let's see how to remove the door panel (driver's side) on Hyundai Ioniq. Before starting the disassembly work, let's disconnect the battery terminals in the luggage compartment. Let's start the disassembly: remove the plastic placed in the corner of the window with a lever. With a screwdriver we go to unscrew the tightening screws placed in the plastic handle and in the space of the door opening lever. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We remove the door panel by hand, unhook any power supply terminals and release cable.


Posted on 31 October 2023 by ScegliAuto



The location of the fuse boxes on the Hyundai Ioniq.
Hyundai Ioniq (2016-2022 / MK 1) In this video tutorial, we can see where the fuse boxes are located on a Hyundai Ioniq, following some simple steps that will help you manage your ca
How to replace the remote control battery of Hyundai Ioniq?
Hyundai Ioniq (2016-2022 / MK 1) In this tutorial we can see how to replace the Hyundai Ioniq remote control battery. For this simple and fast operation we will not need any particul
How to replace the remote control battery of the Hyundai Ioniq?
Hyundai Ioniq (2016-2022 / MK 1) Replacing the battery of the Hyundai Ioniq remote control is a very simple and fast operation, let's see how to proceed in this tutorial. To do this

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos