Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Hyunday Elentra cabin filter replacement

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra HD, MK 4 - Years 2006-2010
Part: Cabin air filter
Operation: Hyunday Elentra cabin filter replacement

Replacing the cabin filter on the Hyundai Elantra is a fairly simple operation. First we open the glove box, now we are going to remove the side hooks that block the drawer, after removing the hooks the drawer should open much more so as to be able to work on the filter compartment. To extract the filter, first of all remove the lid of the filter holder compartment, simply press on the lid to unlock it and pull it off. Now let's take out the old filter and insert the new one, refit the filter cover (make sure it is properly hooked) and finally put the hooks back on the glove box. Hyundai Elentra (2006/2012).


Posted on 7 November 2023 by ScegliAuto



Cabin air filter removal and replacement
Hyundai Elantra (2006-2010 / HD, MK 4) This video shows us how to remove and replace the cabin air filter of our car with a few simple steps. First we need to find where the cabin air filt
How to replace your car's timing chain
Hyundai Elantra (2006-2010 / HD, MK 4) To start, remove the engine oil that is inside by unscrewing the cap under the sump, remove the engine cover that is under the engine with the key, u
How do you replace the cabin filter on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / HD, MK 4) In order to replace the cabin filter of the Hyundai Elantra you have to open the glove box located on the front passenger side, in order to release t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos