Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Hyundai Kona Hybrid

Model: Hyundai Kona MK 2 - Years: 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
This video is currently unavailable

Let's see how to reset the oil light on the Hyundai Kona Hybrid 2023: turn on the vehicle in ON mode without starting the engine, press the "menu" button on the steering wheel or dashboard, navigate to the "comfort" option, and select "service interval". Hold down the "OK" button for 3 to 5 seconds until confirmation appears, and wait until the message "service interval reset" shows.

If the reset does not work, repeat the procedure with the car completely off, then turn it back on. Also, check the state of charge of the starter battery, as an insufficiently charged battery can block the reset procedure.


Posted on 2 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Hyundai Kona Hybrid
How to Reset the Service Light on the Hyundai Kona Hybrid
Hyundai Kona (2017-2023 / MK 1) Resetting the service light on the Hyundai Kona Hybrid is a straightforward task you can do yourself. The first step is to turn on the vehicle's inst…
How to Reset the Service Light on the Hyundai Kona
How to Reset the Service Light on the Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) Today, you will see how to reset the service light on a Hyundai Kona Hybrid vehicle. From the onboard computer, select the settings icon to access th…
How to reset the hybrid system warning on the Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) Let's see how to reset the hybrid system of the Hyundai Kona: turn off the car completely for a minute, then press the start button to turn on the da…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos