Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs on the Hyundai Atos?

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Tail light bulb

In this tutorial, you will see how to replace the rear light bulbs on the Hyundai Atos, an extremely simple and quick operation. First, ensure that the instrument panel is off to work safely, then open the boot lid, locate the three screws along the inner edge of the light unit, and unscrew them using a cross-head screwdriver. Next, grasp the light unit, pull it outwards, and separate it from the bodywork. At this point, simply remove the faulty bulb, replace it, and reassemble everything by following the reverse procedure.

Posted on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Headlight Fuse on a Hyundai Atos?
How to Replace the Dipped Headlight Fuse on a Hyundai Atos?
Hyundai Atos (1997-2008 / MK 1) If only one of the dipped headlights on a Hyundai Atos is working, the cause of the malfunction is likely a faulty fuse. To replace the fuse, go insi…
How to Replace the Instrument Cluster Bulb in a Hyundai Atos
How to Replace the Instrument Cluster Bulb in a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before you can start, sit in the driver's seat of your Hyundai Atos. Begin by prising off and removing the instrument cluster trim. This will reveal …
Where are the fuses located in the Hyundai Atos?
Where are the fuses located in the Hyundai Atos?
Hyundai Atos (2011-2022 / MK 2) All the fuses of the Hyundai Atos are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, two boxes…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos