Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : Hyundai Atos interior ceiling light removal

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Light bulb
Operation: Hyundai Atos interior ceiling light removal

In this video guide we will see how to remove the interior ceiling light and the bulb of a Hyundai Atos. First we go inside the car and unscrew the two screws of the ceiling light so that we can remove it: at this point we will see the bulb that we are going to replace. In the video in question, changes are made for the assembly of LED lamps on the ceiling light, on the pedals and as regards the interior lights: a not too complex job, just follow the video to get an idea of the works and materials of which you will need! The result will be truly exceptional!


Posted on 12 December 2023 by ScegliAuto



How to change the engine oil of a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before starting, we go to extract the oil dipstick, and then go to engage the first gear and activate the parking brake of our Hyundai Atos, and fina
Hyundai Atos fuse diagram location
Hyundai Atos (1997-2008 / MK 1) On Hyundai Atos, as on many other Hyundai models and not only, there are two fuse boxes: the first is located under the hood, on the left side of the
Disassembly of the door panel of a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) We remove the door panel of a Hyundai Atos to remove the external handle. We remove all pieces of plastic cover above the panel (if any). Using a scr

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos