Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Electronic Stability Control in the Hyundai Tucson?

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to disable the electronic stability control in the Hyundai Tucson, an extremely simple and quick operation to perform only when necessary and if you have the required driving skills. First, enter the cabin, then insert the key and start the vehicle.

Next, locate the button depicting a car in a skid on the left switch panel of the dashboard, press and hold it, and check that the corresponding indicator appears on the display. To reactivate the system, simply press the button again.


Posted on 12 August 2026 by ScegliAuto


Related tutorials

How to deactivate the passenger airbag on the Hyundai Tucson?
How to deactivate the passenger airbag on the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) To deactivate the passenger airbag on the Hyundai Tucson, open the front passenger door to access the side of the dashboard. Here, you will find a lo…
How do you deactivate Lane Assist in the Hyundai Tucson?
How do you deactivate Lane Assist in the Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) This video tutorial, it is worth specifying, was filmed in a Hyundai i20, but since it concerns standard settings for Hyundai cars, it can also be co…
How the Active Bonnet Control System Works on the Hyundai Tucson?
How the Active Bonnet Control System Works on the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) The active bonnet closure control system of the Hyundai Tucson monitors, via a sensor, whether the lock of the aforementioned bonnet is properly clos…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos