Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Handbrake Button on a 2018 Hyundai Tucson

Model: Hyundai Tucson - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Parking brake

See other generations:
Video tutorial

As stated in the video, the manufacturer does not sell just the button. If it breaks, you must replace the entire central module (which also contains the drive mode, auto hold buttons, etc.). You can find this module on Amazon with the code B0DT163JF4 for £40.00 with free delivery.

Put the gear lever in neutral to lift the console without issues and pry with a plastic tool near the driver's seat, then pull it off with your hands. Now turn it upside down to access the bottom: you will find three electrical connectors to disconnect (it is advisable to disconnect the large one for easier work).

Take the console to a workbench, remove the 4 silver screws, and take out the module to be changed; take the new module and position it in place; replace the screws, clean any dust accumulated under the console, reconnect all the electrical connectors, reposition the central console, and reattach the gear gaiter (if removed) and check that all buttons work.


Posted on 17 November 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2015-2021 / MK 3, TL) To adjust the handbrake on the Hyundai Tucson, completely remove the centre tunnel cover by loosening the screws and unclipping the clips that secure…
Hyundai Tucson (2015-2021 / MK 3, TL) In this article, with the aid of a video, you will learn how to adjust the handbrake on the 2016 Hyundai Tucson. The procedure is simple and requires…
Hyundai Tucson (2010-2015 / LM, MK 2) In this video, learn how to adjust the manual handbrake of a 2015 Hyundai Tucson. You will need a 10 mm socket on an extension to access the adjustme…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos