Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the handbrake of the 2016 Tucson

Model: Hyundai Tucson TL, MK 3 - Years 2015-2021
Part: Parking brake

In this article, with the support of the video, we see how to adjust the handbrake of the 2016 Hyundai Tucson. The procedure is simple and only requires a socket wrench. To adjust the handbrake, first remove the cover located in the center console behind the handbrake. Once removed, locate the appropriate bolt and tighten it using the socket wrench, adjust it until the handbrake is adjusted. When the handbrake is adjusted, close the cover and the procedure will be complete.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the handbrake of the Hyundai Tucson?
How do you adjust the handbrake of the Hyundai Tucson?
Hyundai Tucson (2015-2021 / TL, MK 3) In order to adjust the handbrake of the Hyundai Tucson, you need to completely remove the covering of the central tunnel, loosening the screws and un…
How to Adjust the Handbrake of a Hyundai Tucson
How to Adjust the Handbrake of a Hyundai Tucson
Hyundai Tucson (2010-2015 / LM, MK 2) In this video, learn how to adjust the manual handbrake of a 2015 Hyundai Tucson. You will need a 10 mm socket on an extension to access the adjustme…
How to adjust the handbrake of the 2013 Hyundai Tucson
How to adjust the handbrake of the 2013 Hyundai Tucson
Hyundai Tucson (2010-2015 / LM, MK 2) Adjusting the handbrake of the 2013 Hyundai Tucson can also be done independently, you just need to use a 12mm key or a Phillips screwdriver. To perf…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos