Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Hyundai Atos

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Front bumper

Removing the front bumper on a Hyundai Atos? Let's see how to do it. Remove the front lights to take off the bumper. Use a plastic lever to remove the securing screws located at the top of the bumper. Once the screws at the top are removed, take out the screws located in the wheel arch liners (remove the clips located at the bottom of the bumper). Remove the bumper from the vehicle body by hand. Secure the bumper to the vehicle body and proceed to tighten all screws around the wheel arch liners and around the perimeter. Finally, reattach the front lights.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front door handle of the Hyundai Atos
Replacement of the front door handle of the Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Below we will see the main steps useful for disassembling and replacing the external handle of the front door of the Hyundai Atos. First of all, we o…
How to Remove the Front Headlamp on a Hyundai Atos
How to Remove the Front Headlamp on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Here’s how to remove the front headlamp on a Hyundai Atos: Open the bonnet by pulling the bonnet release lever and secure it; unscrew the retaining b…
How to Install Parking Sensors on a Hyundai Atos
How to Install Parking Sensors on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) To install the electromagnetic parking sensors on a Hyundai Atos, you need to loosen the screws that secure the rear bumper so that it can be complet…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos