Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to remove the window switch on a Hyundai IX35

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Window lift switch
Operation: How to remove the window switch on a Hyundai IX35

Before we can start, we will have to go and open the door of our Hyundai IX35. So let's start by disengaging and removing the door panel inserts, then unscrew the fixing screws, unhook the electrical connectors and the opening handle cable and remove the panel itself. Once this is done, we will have to unscrew and remove the screws that secure the window lift button to the door panel. By doing so, we will have freed the button itself. At this point, we will be able to permanently remove the switch, and we will have completed the disassembly.


Posted on 20 February 2024 by ScegliAuto



Replacing the outside rearview mirror on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To extract and subsequently replace the exterior rearview mirror on Hyundai Ix35 you simply have to pry it from behind with your hands, making it com
How to reset maintenance service on Hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) Let's see how to reset the maintenance service on Hyundai ix35: turn on the instrument panel of our car with the appropriate remote control key; we t
How to replace the air filter on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before starting, we will have to open the front hood of our Hyundai IX35. So let's start by unhooking and moving the clips that secure the top cover

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos