Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : How to replace the rear brake pads in a Hyundai i20

Hyundai I20 - Video tutorial

Model: Hyundai I20 IB, GB, MK 2 - Years 2014-2021
Part: Brake pads
Operation: How to replace the rear brake pads in a Hyundai i20

In this tutorial we are shown how to proceed in order to replace the rear brake pads in a Hunday i20; the same procedure is also valid for other models such as ix35, sportate and tucson. The first step will be to lift the car so that you can remove the wheel and unscrew the pins on the brake caliper block with a 14mm wrench. Later we will go to remove the caliper from above the disc and by levering with the tip of the key we will be able to remove the pads. At this point, before fitting the new pads, we will clean the disc and its block with a special spray. Finally, we proceed with the assembly of the new pads and reposition the calliper and block of the same in the appropriate seat.


Posted on 20 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - Why did the brake light turn on in the Hyundai I20? Read Answer
    • Hyundai I20 2014-2021 - How much does it cost to replace the brake pads of a Hyundai I20? Read Answer
    • Hyundai I20 2014-2021 - How much does it cost to replace the rear brake pads of the Hyundai I20? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos