Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : How to replace the rear brake pads in the Hyundai I20?

Hyundai I20 - Video tutorial

Model: Hyundai I20 MK 1, PB - Years 2008-2014
Part: Brake pads
Operation: How to replace the rear brake pads in the Hyundai I20?

In this tutorial, we can see how to replace the rear brake pads on the Hyundai I20, a very simple and quick operation but requires good manual dexterity. First of all, we lift the side on which we will be working, taking the necessary safety measures, then we remove the wheel and unscrew both fixing bolts of the caliper. We then separate the caliper from the disc, remove the old brake pads, and clean any dirt residue. At this point, all that remains is to position the replacement parts and follow the reverse procedure to reassemble everything.


Posted on 12 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - Why did the brake light turn on in the Hyundai I20? Read Answer
    • Hyundai I20 2014-2021 - How much does it cost to replace the brake pads of a Hyundai I20? Read Answer
    • Hyundai I20 2014-2021 - How much does it cost to replace the rear brake pads of the Hyundai I20? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos