Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Lights on a Hyundai Ioniq 5

Model: Hyundai Ioniq 5 MK 1 - Years 2022-2026
Part: Interior dome light bulb

This guide outlines the main instructions to remove and replace the interior lights on a Hyundai Ioniq 5. First, get inside the vehicle and start by removing and replacing the smaller dome lights, as well as the rear light and the one located in the trunk; pry the dome light to remove and replace the bulbs (or the entire dome light). Next, replace the lights in the sun visors and the glove compartment; finally, remove the cabin dome light to replace the other bulbs, following the video tutorial until the end!

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Interior Light Color on the Hyundai Ioniq 5
How to Change the Interior Light Color on the Hyundai Ioniq 5
Hyundai Ioniq 5 (2022-2026 / MK 1) Today, we will see in this video tutorial how to change the color of the interior lights on the dashboard and in the cabin of the Hyundai Ioniq 5. Fi…
How to reset the maintenance light on the Hyundai Ioniq 5
How to reset the maintenance light on the Hyundai Ioniq 5
Hyundai Ioniq 5 (2022-2026 / MK 1) If you own a Hyundai Ioniq 5 and don't know how to manually reset the service light, don't worry because in this new guide you will find all the step…
How to Replace the Key Battery of a Hyundai Ioniq?
Hyundai Ioniq 5 (2022-2026 / MK 1) To replace the key battery of your Hyundai Ioniq, start by locating the opening slot on the key. Using a small screwdriver or a coin, carefully open …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos