Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Hyundai i30?

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part:

To reset this light, you need to use a specific physical button, which is the one labelled "set" that also has the symbol representing the tyre pressure light on the dashboard. This button is located on the control panel installed on the dashboard, exactly to the left of the steering wheel. Once the ignition is on, press and hold the button until the light flashes and then turns off. Once it has turned off, you can release the button and switch off the ignition. Turn it back on to check that the procedure was successful.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the 2015 Hyundai i30
How to Reset the Tyre Pressure Warning Light on the 2015 Hyundai i30
Hyundai I30 (2011-2016 / MK 2, GD) In this new guide for all you owners of a Land Rover Hyundai i30 second series (2015), you will discover the steps to manually reset the tyre pressur…
Resetting the Tyre Pressure Light on a Hyundai I30
Resetting the Tyre Pressure Light on a Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) .. Today, you will learn how to reset the tyre pressure light on a Hyundai I30. Before performing the reset operation, it is essential.. …
How to reset the tire pressure light on the Hyundai I30
How to reset the tire pressure light on the Hyundai I30
Hyundai I30 (2016-2024 / PD, MK 3) The information provided in this guide will allow us to reset the tire pressure warning light of the Hyundai I30; before calibrating the TPMS sensors…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos