Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in a Hyundai IX 20

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Diesel fuel filter

In this video tutorial, you will see how to replace the diesel filter in a Hyundai IX 20 by following a few simple steps: first, get into the vehicle, turn off the engine, and pull the handbrake; lift the bonnet and secure it with the prop rod. Remove the filter housing and the battery; to remove the battery, you need to unscrew the ECU support (you will need to remove the plastic cover above it). Once removed, you will access the diesel filter; to replace it, unscrew the support that has two nuts. Disconnect the fuel line connectors and the sensor connectors. At this point, you can unscrew the filter and replace it with a new one.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Hyundai IX20
How to replace the air filter of the Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) The replacement of the air filter of the Hyundai IX20 follows easily executable steps. The filter we will insert is a JFAK22A2320. The first step is …
Replacing the Cabin Air Filter of the Hyundai Ix20
Replacing the Cabin Air Filter of the Hyundai Ix20
Hyundai ix20 (2010-2019 / OJ) This guide explains how to remove and replace the cabin air filter or pollen filter of the Hyundai Ix20, following the instructions below. First, get…
How do you replace the cabin filter of the Hyundai IX20?
How do you replace the cabin filter of the Hyundai IX20?
Hyundai ix20 (2010-2019 / OJ) The cabin filter of the Hyundai IX2 can be completely replaced by opening the glove compartment located on the passenger side, so that it is possible…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos