Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix20
    4. : Replace the battery of the Hyundai IX20.

Hyundai ix20 - Video tutorial

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Battery
Operation: Replace the battery of the Hyundai IX20.

Let's see how to replace the battery in a Hyundai IX20, bearing in mind that this operation is quite laborious. We start by disconnecting the cables, first the positive one and then the negative one, being careful not to let them touch the body parts. Then, using a 10mm wrench, we unscrew the two bolts that hold it in place on the left side, and then proceed to loosen two bolts at the back with a 12mm wrench. We also loosen a nut, located in front of the negative terminal clamp, which holds a bracket, and finally we disconnect the connector located above the rear side. The only thing left is to remove the battery, which is not an easy task, by sliding and rotating it to the left side. We place the new battery and proceed in reverse with the operations.


Posted on 21 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos