Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the spark plugs located in the Hyundai Eon?

Model: Hyundai eON MK 1 - Years 2011-2019
Part: Spark plugs

In this video, you can see where the spark plugs are located in the Hyundai Eon and how to proceed to remove them, useful in case you need to clean or replace them. As shown, they are located at the front of the engine and are accessible by first removing the air filter box. To do this, simply loosen the relevant bolts and disconnect the intake manifold. Once you have access to the spark plugs, you can disconnect the power cables and remove them using the appropriate wrench. Make sure the engine is completely cool before proceeding.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs on a Hyundai Eon?
How to Replace Spark Plugs on a Hyundai Eon?
Hyundai eON (2011-2019 / MK 1) The spark plugs of the Hyundai Eon are located inside the engine compartment. To replace them, first lift the hood after releasing it from inside the…
How to Replace the Cabin Air Filter on the Hyundai Eon
How to Replace the Cabin Air Filter on the Hyundai Eon
Hyundai eON (2011-2019 / MK 1) Replacing the cabin air filter on your Hyundai Eon (2011-2019) is a very simple task that you can perform independently by following the instructions…
How to Adjust the Clutch Cable on the Hyundai Eon
How to Adjust the Clutch Cable on the Hyundai Eon
Hyundai eON (2011-2019 / MK 1) To adjust the clutch cable on the Hyundai Eon, open the hood to access the components inside the engine bay: to reach the clutch cable, you will need…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos