Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on a Hyundai Eon?

Model: Hyundai eON MK 1 - Years 2011-2019
Part: Spark plugs

The spark plugs of the Hyundai Eon are located inside the engine compartment. To replace them, first lift the hood after releasing it from inside the cabin, and remove the engine cover. Once this is done, disconnect the connectors and remove the ignition coils. Use the appropriate wrench to extract the spark plugs, which you should obtain before starting the procedure. Be careful not to drop anything into the spark plug well during the replacement. After removing the old spark plugs and installing the new ones, reposition the various components removed earlier.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the spark plugs located in the Hyundai Eon?
Where are the spark plugs located in the Hyundai Eon?
Hyundai eON (2011-2019 / MK 1) In this video, you can see where the spark plugs are located in the Hyundai Eon and how to proceed to remove them, useful in case you need to clean o…
How to Replace the Front Wipers on the Hyundai Eon
Hyundai eON (2011-2019 / MK 1) Discover in this short and simple guide how to remove and replace the front wipers on the Hyundai Eon. First, move to the front and lift the wiper ar…
How to replace the battery in the Hyundai Eon
How to replace the battery in the Hyundai Eon
Hyundai eON (2011-2019 / MK 1) In this video tutorial, follow the steps to remove and replace the battery in the Hyundai Eon. First, open the hood of your car and start disconnecti…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos