Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santro
    4. : How to replace the rear lights in the Hyundai Santro

Hyundai Santro - Video tutorial

Model: Hyundai Santro MX - Years 1998-2015
Part: Tail light
Operation: How to replace the rear lights in the Hyundai Santro

In today's video you will see how to replace the rear light cap in the Hyundai Santro. First we open the tailgate. At this point we proceed by unscrewing the fixing screws of the shell to the bodywork. Once this is done, we proceed with the extraction of the shell, being careful in removing the fixing pins. Once extracted we connect the connectors of the bulbs from the latter and then we can proceed with the installation of the new unit in the same way. Before screwing the screws back in, let's check the bulbs and then close them.


Posted on 22 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos